Carbide Saw Blade Sharpening
By Tooth Count & Grind
| ATB | TCG | |
| 0 – 9 | $16.00 | $18.00 |
| 10 – 19 | $17.00 | $19.00 |
| 20 – 29 | $19.00 | $21.00 |
| 30 – 39 | $20.00 | $22.00 |
| 40 – 49 | $22.00 | $25.00 |
| 50 – 59 | $25.00 | $28.00 |
| 60 – 69 | $26.00 | $29.00 |
| 70 – 79 | $28.00 | $31.00 |
| 80 – 89 | $29.00 | $32.00 |
| 90 – 99 | $31.00 | $35.00 |
| 100 – 109 | $33.00 | $37.00 |
16” & Larger – Add $5.00 per Dia. Inch
Split Scoring Saws – $25.00/set
Hollow Ground Saws – Various
ATAF Shear Face Grind – Add $5.00
Extra Grind Fee – Add 50%
Carbide Dado Sets
*Outside saws priced as carbide saws (above)
2T Inside Chippers – $5.00
4T Inside Chippers – $7.00
Carbide Tip Replacement (per blade)
1 – 5 Tips Replaced – $7.00 ea
6 or More Tips Replaced – $6.00 ea
Router Bit Sharpening
Carbide & High Speed Steel
| 1 Flute | 2 Flute | 3 Flute | |
| Router Bits up to 1” | $8.00 | $9.00 | $10.00 |
| Router Bits over 1” to 2” | $11.00 | $12.00 | $13.00 |
| Router Bits over 2” | $14.00 | $15.00 | $16.00 |
| Spirals | Various + s/h | ||
| Compression Bits | Various + s/h |
Planer & Jointer Knives
| High Speed Steel | $1.00/in. |
| Carbide inlaid or Solid | $1.50/in. |
| 3/8″ to 1/2″ Thick Knives | $1.75/in. |
| 3/8″ x 1/2″ Double Sided | $3.50/in. |
Shaper Cutter Sharpening
| Carbide | 2 wing | 3 wing | 4 wing |
| 1/2″ w. | $14.00 | $17.00 | $20.00 |
| 3/4″ w. | $16.00 | $19.00 | $22.00 |
| 1″ & Up | $17.00 | $20.00 | $27.00 |
| Raised Panel Cutter | $24.00 | $29.00 |
*Please note, at this time, we no longer accept kitchen knives, hunting knives, chainsaws, chisels or annular bits. Thank you for your understanding.
Want to Drop off your Blades and you live out of Grand Junction? You can drop off at one of these locations:
Eagle: Tool Clinic or Alpine Lumber
Glenwood: Tools For Living
Montrose: Hartman Brothers
Shipping directly to us is a great option.
If you do, please make sure your contact information is attached to the box as well as securing your dull blades. Blades can be damaged in the shipping process if they are loose. Please put cardboard in between each blade to protect them if they are loose. Thank you!
*Without instructions to the contrary, we may perform the necessary services needed to restore cutting performance.
*Prices may change without notice.